PROJECT APPLICATION DATA SHEET FOR LAB SAMPLES

Sample Preparation: Collect a minimum of 3-5 gallons of a representative water sample to be tested. The sample should be free from any existing chemical pretreatment. Seal the container with tape to prevent leakage during shipment. Ship sample promptly after collection. Samples should be packed in ice or a cooler and delivered overnight to:

Aquatech-Global Systems, LLC
Attention: Enviro-Lab Test Manager
Main and Center Street Lee, MA 01238 USA
Phone: (413) 243.3424 Fax: (413) 243.3426

Click here to download questionaire to include with your sample. (Requires Microsoft Word)

If possible, schedule the arrival of the sample as early in the workweek as possible. Please call ahead to alert our staff of incoming samples or for special testing requirements. Standard tests include pH, TSS, BOD, FOG or COD. Samples requiring analysis outside of these parameters may require a processing fee. Otherwise, the analysis is free of charge.

Please include a sample of any currently used flocculation/coagulation chemicals if available as well as any MSDS sheets that may be available regarding those products. If none are currently used or available we will select an appropriate scenario. Also, indicate any special requirements or limitations (if any) for the process regarding chemistry. If possible, indicate the sample pH and temperature at the time of collection so that we can verify upon analysis that the sample is representative. Please indicate date/time of collection on the container.

AG Representative:

Customer Contact Information:

Application Description:

Flow Rate/Capacity (GPM):

Total Suspended Solids (TSS) (MG/L):

Other Parameter Levels (MG/L):

Clarification Requirements (Allowable Maximum MG/L):

Other Considerations:

Quotation Options: